澳门十大赌场注册平台-正规赌博十大平台排行-首页

专业承接无锡,苏州,常州不锈钢喷砂加工,喷砂加工技术专业

喷砂加工服务热线:0510-83582211   15850611303

企业主要业务范围为无锡不锈钢喷砂加工、苏州不锈钢喷砂加工、常州不锈钢喷砂加工以及陶瓷砂等...

喷砂常识当前位置:主页 > 喷砂常识 >

喷砂一般用在哪些地方

(一)工件涂镀、工件粘接前处理
 
喷砂能把工件表面的锈皮等一切污物清除,并在工件表面建立起重要的基础图式(即通常所谓的毛面),而且可以通过调换不同粒度的磨料,达到不同程度的粗糙度,大大提高工件与涂料、镀料的结合力。或使粘接件粘接牢固,质量好。
Sandblasting to scale on the surface of the workpiece and all dirt removed, and on the base of workpiece surface it is very important to build schemata (usually the so-called hair side), but also by changing different particle size of abrasive, to varying degrees of roughness, greatly improve the workpiece and the adhesion strength of the coating, plating materials. Or make adhesive bonding stronger, better quality.
(二)铸锻件毛面、热处理后工件的清理与抛光
 
喷砂能清理铸锻件、热处理后工件表面的一切污物(如氧化皮、油污等残留物),并将工件表面抛光提高工件的光洁度,起到美化工件的作用。
 
喷砂清理能使工件露出均匀一致的金属本色,使工件外表美观,达到美化装饰的作用。
Sandblasting can clean up all the dirt on the surface of the casting, heat treatment after forging workpiece (such as scale, oil residue), and improve the finish of workpiece, the workpiece surface polishing beautification artifacts.
Sand blasting can make the metal workpiece with uniform is ecru, make workpiece appearance more beautiful, achieve beautification adornment effect.
(三)机加工件毛刺清理与表面美化
 
喷砂能清理工件表面的微小毛刺,并使工件表面加平整,消除了毛刺的危害,提高了工件的档次。并且喷砂能在工件表面交界处打出小的圆角,使工件显得加美观、加精密。
Sandblasting can clean up the small burr on the surface of the workpiece, and make the surface more smooth, eliminate the dangers of the burr, improve the level of the workpiece. And sand can in workpiece surface junction with small rounded corners, make artifacts appear more beautiful, more precise.
 
(四)改善零件的机械性能
 
机械零件经喷砂后,能在零件表面产生均匀细微的凹凸面(基础图式),使润滑油得到存储,从而使润滑条件改善,并减少噪声提高机械使用寿命。
Mechanical parts after sandblasting, can produce even subtle in parts surface concave and convex surface (basic schema), the lubricating oil storage, so that improve lubrication condition, and improve the service life of the mechanical to reduce noise.
 
(五)光饰作用
 
1、对各种工件表面抛光,使工件表面美观。
 
2、使工件达到光滑又不反光要求。
 
对于某些特殊用途工件,喷砂可随意实现不同的反光或亚光。如不锈钢工件、木制家具表面亚光化,磨砂玻璃表面的花纹图案,以及布料表面的毛化加工等。
For some special purpose artifacts, sandblasting can achieve different reflective or inferior smooth. Inferior smooth, wooden furniture, such as stainless steel workpiece surface, the surface of the ground glass decorative pattern design, and roughen the processing on the surface of the fabric.
(六)消除应力及表面强化
 
通过砂丸敲击工件表面,消除应力,增加工件表面强度,如弹簧、机加工刀具和飞机叶片等工件的表面处理。
Through the sand pill on the workpiece surface, eliminating stress, increase the surface strength, such as spring, machining tool and workpiece surface treatment such as plane blade
咨询热线:0510-83582211   15850611303
无锡喷砂加工联系人:高俊杰 15850611303 高明吉 13906173847     电 话:0510-83582211     传 真:0510-83582211 备案号:不锈钢喷砂加工
地 址:无锡市惠山区前洲北幢村石洲路   网 址:www.qzgmjjx.com   邮 箱:zjfgdps@sina.com 提供无锡不锈钢喷砂加工,苏州不锈钢喷砂加工, 常州不锈钢喷砂加工

澳门十大赌场注册平台|正规赌博十大平台排行

XML 地图 | Sitemap 地图